HPE ProLiant ML30 Gen10

Configuration Proposal

1x	P16928-421	HPE ProLiant ML30 G10, Intel Xeon E-2224 QuadCore 3.4 GHz, 16 GB RAM, 2x LAN, enclosure for HDDs with LFF low profile carrier
2x	861686-B21	1 TB SATA hard disk 3.5" non-hot-plug, LFF low profile carrier
1x	615732-B21	332T 2-port Gigabit network card, PCIe x1

Certified Models

P16928-421, P06781-425, P06785-425, P06789-425, P06793-425

 

Memory Expansion

879505-B21

8 GB PC4-2666 ECC UDIMM Memory Expansion

Certified network cards

	615732-B21	332T 2-port Gigabit network card, PCIe x1
	811546-B21	366T 4-port Gigabit network card, PCIe x4

Certified Hard Drives

	801882-B21	1 TB SATA hard disk 3.5" non-hot-plug, without HDD carrier
	861686-B21	1 TB SATA hard disk 3.5" non-hot-plug, LFF low profile carrier
	861681-B21	2 TB SATA hard disk 3.5" non-hot-plug, LFF low profile carrier

BIOS Settings

For correct operation, the following settings must be configured in the BIOS setup:

	System Configuration > BIOS/Platform Configuration > System Options > Server Availability Automatic Power-On : Always Power On
	System Configuration > BIOS/Platform Configuration > Processor Options Processor x2APIC Support : Disabled
	System Configuration > BIOS/Platform Configuration > Boot Options Boot Mode : Legacy BIOS Mode
	System Configuration > BIOS/Platform Configuration > Storage Options > SATA Controller Options Embedded SATA Configuration : SATA AHCI Support

Back to HPE Server Overview